View FX10B-168P-SV2_7039750.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 10 + gbps 0.5mm pitch stacking connectors fx10 series electrical interface for the oif 100g long-haul dwdm transmission module (msa-100glh) 0.5mm pitch stacking height : 4 ~ 8mm number of contacts with ground plate type : 80 / 100 / 120 / 140 without ground plate type : 96 / 120 / 144 / 168 improved transmission efficiency between boards transmission characteristics have been improved through a design that fixes ground plates to both sides of the header and receptacle. 10 signal:1 ground arrangement signal and ground are arranged in a ratio of 10:1 with the ground plate smt connected to the board. the ground stability achieved serves to reduce noise. metal fittings for added solder weld strength metal fittings provide greater adhesion to the board, protecting against peeling. the unique connector design provides a connection between the fitting and the ground plate for a stronger ground. suited to high-density applications the signal contact pitch of 0.5 mm produces a smaller connector utilizing less board area for mounting. high contact reliability effective mating length is 1.1 mm for signal contacts. optional ground plate an alternate style without the ground plate is available. the space provided by the ground plate removal has been filled with additional signal contacts. mechanical features ( ) metal fitting housing ground plate and metal fitting make contact ground plate signal contact 0.5mm 0.75mm 0.75mm cut section stack height headers receptacles fx10#-*p/*-sv fx10#C*p/*Csv1 fx10#-*s/*-sv 4mm 5mm with ground plate without ground plate headers receptacles fx10#-*p-sv fx10C*pCsv1 fx10#-168p-sv2 fx10#-168p-sv3 fx10#-168p-sv4 fx10#-*s-sv 4mm 5mm 6mm 7mm 8mm with gnd plate type insertion-loss-to-crosstalk-ratio(icr) the insertion-loss-to-crosstalk-ratio (icr) with five- aggressor differential fext meets the extrapolated ieee 802.3ap specification for 10 + gbps. differential impedance the differential impedance is within 100 +/- 10 ohms at 30ps rise time (20% to 80%). signal integrity features 0 2 4 6 8 10 0 10 20 30 40 50 60 frequency (ghz) icr (db) icr icr spec 0 200 400 600 800 1000 85 90 95 100 105 110 115 time (ps) z (ohm) s(3,3) .0/4#
2011.01 w
2 fx10 series 10 + gbps 0.5mm pitch stacking connectors msa-100glh electrical interface receptacles without ground plate (?1) (?1) guidepost 140 a 0.20.05 no.a84 no.b84 no.a83 no.b83 41.50.2 49.10.3 44.40.1 (p=0.5) no.a2 no.a1 no.b1 no.b2 7.30.3 3.20.3 7.10.2 2.50.2 (0.6) unit: mm recommended land pattern dimensions(metal mask dimensions) board-to-board distance recommended metal mask thickness: 0.15mm note not required in products without guideposts. note stacking height from lead to lead (reference dimensions) board-to-board distance stencil (metal mask) shall be based on hirose's recommended aperture and thickness. 1 0.30.03(land width) 7.7 +0.1 0 0.50.03 1.450.05 ?1.20.05 41.50.05 44.40.05 3.1 +0.1 0 4.5 0 -0.1 46.3 0 -0.1 49.5 +0.1 0 0.250.03(metal mask) no.b1 no.b2 no.a2 no.a1 no.a84 no.a83 no.b83 no.b84 ?1.20.05 1 1 (1.1):mating length receptacle connector fx10a(b)-168s-sv(83) header connector fx10a(b)-168p-sv*(83) (a) b solder solder 2 1 fx10a(b)-168p-sv(83) fx10a(b)-168p-sv1(83) fx10a(b)-168p-sv2(83) fx10a(b)-168p-sv3(83) fx10a(b)-168p-sv4(83) fx10a(b)-168s-sv(83) (a) b 4 5 6 7 8 4.30.127 5.30.127 6.00.127 7.00.127 8.00.127 2 1 3 3 pcb pcb 1 2 3 product specifications (rating) rating rated voltage rated current note 1 50 v ac operating humidity range operating temperature range relative humidity 95% max (no condensation) -55 to 85? storage temperature range storage humidity range 40 to 70% (note 2) -40 to +60? (note 2) note 1: refer to fx10-168pin derating curves from test reports tr570e-20587. note 2: the term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a lo ng period. the operating temperature and humidity range are suited to the non-conducting condition following board assembly. note 3: other information are shown in general product specifications. part no. cl no. fx10a-168s-sv ( ** ) fx10b-168s-sv ( ** ) 570-0244-7- ** 570-0254-0- ** number of contacts signal 168 remarks with guideposts without guideposts note 1: there is no polarity in terms of board mounting for this product. note 2: the coplanarity of this product's smt leads is 0.1 mm or less. note 3: please order embossed tape packaged items by the reel. (one reel holds 1,000 pieces.) note 4: using multiple connectors between identical boards is not recommended. [specifications number] - ? ? , ( ? ? ) (83): embossed tape packaging / aup 0.76m (93): tray packaging / aup 0.76m
3 fx10 series 10 + gbps 0.5mm pitch stacking connectors msa-100glh electrical interface headers without ground plate (?1) (0.6) a0.3 (?1) 140 a guidepost 44.40.1 49.10.3 41.50.2 5.90.3 5.70.2 2.50.2 no.a83 no.a83 no.a84 no.a1 no.a2 no.a84 0.20.05 (p=0.50) no.b1 no.b2 recommended land pattern dimensions (metal mask dimensions) recommended metal mask thickness: 0.15 mm note not required in products without guideposts. 1 3.1 +0.1 0 ?1.20.05 ?1.20.05 0 -0.1 2.3 +0.1 0 6.3 1 1 0.30.03(land pattern) 0.250.03(metal mask) no.a83 no.b84 no.b1 no.b2 no.b83 no.a84 0.50.03 no.a2 1.450.05 no.a1 49.5 +0.1 0 46.3 0 -0.1 44.40.05 41.50.05 unit: mm part no. cl no. fx10a-168p-sv ( ** ) fx10a-168p-sv1 ( ** ) fx10a-168p-sv2 ( ** ) fx10a-168p-sv3 ( ** ) fx10a-168p-sv4 ( ** ) fx10b-168p-sv ( ** ) fx10b-168p-sv1 ( ** ) FX10B-168P-SV2 ( ** ) fx10b-168p-sv3 ( ** ) fx10b-168p-sv4 ( ** ) 570-0044-8- ** 570-0144-2- ** 570-0302-1- ** 570-0304-7- ** 570-0306-2- ** 570-0054-1- ** 570-0154-6- ** 570-0303-4- ** 570-0305-0- ** 570-0307-5- ** 3.5 4.5 5.25 6.25 7.25 3.5 4.5 5.25 6.25 7.25 1,000 1,000 900 800 700 1,000 1,000 900 800 700 number of contacts signal 168 remarks a quantity/reel (note 3) with guideposts without guideposts note 1: there is no polarity in terms of board mounting for this product. note 2: the coplanarity of this product's smt leads is 0.1 mm or less. note 3: please order embossed tape packaged items by the reel. note 4: using multiple connectors between identical boards is not recommended. [specifications number] - ? ? , ( ? ? ) (83): embossed tape packaging / aup 0.76m (93): tray packaging / aup 0.76m
4 fx10 series 10 + gbps 0.5mm pitch stacking connectors signal integrity pin assignment impedance to match 100 ohm differential impedance and to reduce crosstalk, a staggered gsgsg pin assignment is recommended. (g=ground and s=signal) the differential impedance is 100 +/- 10 ohm for fx10 at 30 ps rise time (20% to 80%). 0 200 400 600 800 1000 85 90 95 100 105 110 115 time (ps) z (ohm) s(3,3) 0 200 400 600 800 1000 85 90 95 100 105 110 115 time (ps) z (ohm) s(3,3) 0 200 400 600 800 1000 85 90 95 100 105 110 115 time (ps) z (ohm) s(3,3) 0 200 400 600 800 1000 85 90 95 100 105 110 115 time (ps) z (ohm) s(3,3) propagation delay the propagation delay is 62 and 67 ps for fx10 of 4mm and 5mm height (with and without gnd), respectively. 4 mm (without gnd) 4 mm (with gnd) 5 mm (with gnd) 5 mm (without gnd) gsgsg signal ground diff pair
5 fx10 series 10 + gbps 0.5mm pitch stacking connectors insertion loss the differential insertion loss crosses 1 db at 10.8 and 9.2 ghz for fx10 of 4mm and 5mm height, respectively. 0 5 10 15 20 0 frequency (ghz) s (db) il 0 5 10 15 20 0 frequency (ghz) s (db) il 0 5 10 15 20 0 frequency (ghz) s (db) il return loss the differential return loss meets the ieee 802.3ap specification to 20 + and 13.5 ghz for fx10 of 4mm and 5mm height, respectively. 4 mm (without gnd) 4 mm (with gnd) 5 mm (with gnd) 5 mm (without gnd) 0 5 10 15 20 0 frequency (ghz) rl (db) rl rl spec 0 5 10 15 20 0 frequency (ghz) rl (db) rl rl spec 0 5 10 15 20 0 frequency (ghz) rl (db) rl rl spec 0 5 10 15 20 0 frequency (ghz) rl (db) rl rl spec 4 mm (without gnd) 4 mm (with gnd) 5 mm (with gnd) 5 mm (without gnd)
6 fx10 series 10 + gbps 0.5mm pitch stacking connectors 0 5 10 15 20 0 frequency (ghz) s (db) fext 0 5 10 15 20 0 frequency (ghz) s (db) fext 0 5 10 15 20 0 frequency (ghz) s (db) fext 0 5 10 15 20 0 frequency (ghz) s (db) fext 4 mm (without gnd) 4 mm (with gnd) 5 mm (with gnd) 5 mm (without gnd) near-end crosstalk (next) the staggered gsgsg pin assignment results in low differential next between neighboring pairs. 0 5 10 15 20 0 frequency (ghz) s (db) next 0 5 10 15 20 0 frequency (ghz) s (db) next 0 5 10 15 20 0 frequency (ghz) s (db) next 0 5 10 15 20 0 frequency (ghz) s (db) next far-end crosstalk (fext) the staggered gsgsg pin assignment results in low differential fext between neighboring pairs. 4 mm (without gnd) 4 mm (with gnd) 5 mm (with gnd) 5 mm (without gnd)
7 fx10 series 10 + gbps 0.5mm pitch stacking connectors insertion-loss-to-crosstalk ratio (icr) the insertion-loss-to-crosstalk ratio (icr) with five-aggressor differential fext meets the extrapolated ieee 802.3ap specifica tion to 10 + gbps. 0 2 4 6 8 10 0 10 20 30 40 50 60 frequency (ghz) icr (db) icr icr spec 0 2 4 6 8 10 0 10 20 30 40 50 60 frequency (ghz) icr (db) icr icr spec 0 2 4 6 8 10 0 10 20 30 40 50 60 frequency (ghz) icr (db) icr icr spec 0 2 4 6 8 10 0 10 20 30 40 50 60 frequency (ghz) icr (db) icr icr spec 4 mm (without gnd) 4 mm (with gnd) 5 mm (with gnd) 5 mm (without gnd)
8 fx10 series 10 + gbps 0.5mm pitch stacking connectors measured at 100 v dc 150 v ac applied for one minute measured at 100 ma frequency: 10 to 55 hz, amplitude of 0.75 mm in 3 directions, 10 cycles each acceleration of 490 m/s 2 , 11 ms duration, sine half-wave waveform, for 3 cycles in the both directions of each of the 3 axes temperature: -55? 15 to 35? 85? 15 to 35? time: 30 min. 2 to 3 min. 30 min. 2 to 3 min. for 5 cycles reflow: at the recommended temperature profile soldering iron temperature: 360? for 5 seconds temperature of 40?, humidity of 90 to 95%, duration 96 h 50 times 100 m ohm min no flashover or breakdown 60 m ohm max no electrical discontinuity for 1s min no damage, cracks, or parts looseness no electrical discontinuity for 1s min no damage, cracks, or parts looseness contact resistance of 70 m ohm max no damage, cracks, or parts looseness no melting of resin portion which affects performance general product specifications item requirements conditions note 1: includes temperature rise caused by current flow. note 2: the term storage refers to an unused products prior to board mounting (including packing materials) that is being kept for a lo ng period. the operating temperature and humidity range are suited to the non-conducting condition following board assembly. note 3: information contained in this catalog represents general requirements for this series. contact us for the drawings and specific ations for a specific part number shown. rating rated voltage rated current 50 v ac 0.3 a operating humidity range operating temperature range relative humidity 95% max (no condensation) -55 to 85? (note 1) storage humidity range storage temperature range 40 to 70% (note 2) -10 to +60? (note 2) 1. insulation resistance 2. voltage resistance 3. contact resistance 4. vibration 5. shock 6. damp heat (steady state) 8. durability 9. resistance to soldering heat 7. temperature cycle contact resistance of 70 m ohm max, insulation resistance of 100 m ohm min, no damage, cracks, or parts looseness contact resistance of 70 m ohm max, insulation resistance of 100 m ohm min, no damage, cracks, or parts looseness ordering information f f x x 1 1 0 0 # # - ? p p / / ? - s s v v 1 1 ( ( ? ? ) ) 1 2 7 3 4 5 6 materials part material process notes insulator contacts ground plate metal fitting lcp phosphor bronze phosphor bronze phosphor bronze beige header contact area: gold plating lead area: tin plating receptacle contact area: gold plating lead area : flash plating tin plating tin plating ul94v-0 --- --- --- series name : fx10 form symbol a : with guide post b : without guide post number of contacts signal/ground: 80/8, 100/10, 120/12, 140/14 signal: 96, 120, 144, 168 connector type p : header s : receptacle contact form sv : straight smt product height blank : standard 1 : standard + 1mm packaging classification blank, (71) : tray packaging (21), (91): embossed tape packaging 3 5 4 6 7 1 2 with ground plate without ground plate
9 fx10 series 10 + gbps 0.5mm pitch stacking connectors recommended land pattern dimensions (metal mask dimensions) recommended metal mask thickness: 0.15 mm headers with ground plate 4mm stacking height note cross-hatched portions, totaling n places, indicate the ground circuits. cross-hatched portions, 2 places on both sides, indicate the metal fittings. the cross-hatched area inside the smt land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the smt land width. not required in products without guideposts. 1 2 3 4 unit: mm note 1: there is no polarity in terms of board mounting for this product. note 2: the coplanarity of this product's smt leads is 0.1mm or less. note 3: please order embossed tape packaged items by the reel. (one reel holds 1,000 pieces.) note 4: using multiple connectors between identical boards is not recommended. [specifications number] - ? ? , ( ? ? ) (71): tray packaging (91): embossed tape packaging part no. cl no. fx10a- 80p/ 8-sv( ** ) fx10a-100p/10-sv( ** ) fx10a-120p/12-sv( ** ) fx10a-140p/14-sv( ** ) fx10b- 80p/ 8-sv( ** ) fx10b-100p/10-sv( ** ) fx10b-120p/12-sv( ** ) fx10b-140p/14-sv( ** ) cl570-0001-5- ** cl570-0002-8- ** cl570-0003-0- ** cl570-0004-3- ** cl570-0021-2- ** cl570-0022-5- ** cl570-0023-8- ** cl570-0024-0- ** number of contacts signal 80 100 120 140 80 100 120 140 ground 8 10 12 14 8 10 12 14 a 23.5 29.5 35.5 41.5 23.5 29.5 35.5 41.5 b c d e f remarks 18 24 30 36 18 24 30 36 31.1 37.1 43.1 49.1 31.1 37.1 43.1 49.1 26.4 32.4 38.4 44.4 31.5 37.5 43.5 49.5 31.5 37.5 43.5 49.5 28.3 34.3 40.3 46.3 28.3 34.3 40.3 46.3 without guideposts with guideposts
10 fx10 series 10 + gbps 0.5mm pitch stacking connectors recommended land pattern dimensions (metal mask dimensions) recommended metal mask thickness: 0.15 mm headers with ground plate 5mm stacking height a (5.7) 0.20.05 0.50.05 (0.75) (0.75) a0.2 b0.2 d0.1 guidepost c0.3 4.50.3 (0.6) 2-(?1) (0.5) (6) 2.50.2 5.90.3 note cross-hatched portions, totaling n places, indicate the ground circuits. cross-hatched portions, 2 places on both sides, indicate the metal fittings. the cross-hatched area inside the smt land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the smt land width. not required in products without guideposts. 1 2 3 4 d b

#" #
% b #
f
'

%
% b;8
"
2
" %.j
(
%/ bd

"& "

% l #
"m6 ? ? , ( ? ? ) (71): tray packaging (91): embossed tape packaging part no. cl no. fx10a- 80p/ 8-sv1(**) fx10a-100p/10-sv1(**) fx10a-120p/12-sv1(**) fx10a-140p/14-sv1(**) fx10b- 80p/ 8-sv1(**) fx10b-100p/10-sv1(**) fx10b-120p/12-sv1(**) fx10b-140p/14-sv1(**) cl570-0101-0-** cl570-0102-2-** cl570-0103-5-** cl570-0104-8-** cl570-0121-7-** cl570-0122-0-** cl570-0123-2-** cl570-0124-5-** number of contacts signal 80 100 120 140 80 100 120 140 ground 8 10 12 14 8 10 12 14 a 23.5 29.5 35.5 41.5 23.5 29.5 35.5 41.5 b c d e f remarks 18 24 30 36 18 24 30 36 31.1 37.1 43.1 49.1 31.1 37.1 43.1 49.1 26.4 32.4 38.4 44.4 31.5 37.5 43.5 49.5 31.5 37.5 43.5 49.5 28.3 34.3 40.3 46.3 28.3 34.3 40.3 46.3 without guideposts with guideposts
11 fx10 series 10 + gbps 0.5mm pitch stacking connectors recommended land pattern dimensions (metal mask dimensions) recommended metal mask thickness: 0.15 mm receptacles with ground plate a (0.75) (0.75) 0.50.05 0.20.05 (7.1) a0.2 b0.2 c0.3 d0.1 3.20.3 2.50.2 7.30.3 (6) (0.5) (0.6) 2-(?1) guidepost unit: mm part no. cl no. fx10a- 80s/ 8-sv(**) fx10a-100s/10-sv(**) fx10a-120s/12-sv(**) fx10a-140s/14-sv(**) fx10b- 80s/ 8-sv(**) fx10b-100s/10-sv(**) fx10b-120s/12-sv(**) fx10b-140s/14-sv(**) cl570-0201-4-** cl570-0202-7-** cl570-0203-0-** cl570-0204-2-** cl570-0221-1-** cl570-0222-4-** cl570-0223-7-** cl570-0224-0-** number of contacts signal 80 100 120 140 80 100 120 140 ground 8 10 12 14 8 10 12 14 a 23.5 29.5 35.5 41.5 23.5 29.5 35.5 41.5 b c d e f remarks 18 24 30 36 18 24 30 36 31.1 37.1 43.1 49.1 31.1 37.1 43.1 49.1 26.4 32.4 38.4 44.4 31.5 37.5 43.5 49.5 31.5 37.5 43.5 49.5 28.3 34.3 40.3 46.3 28.3 34.3 40.3 46.3 without guideposts with guideposts note cross-hatched portions, totaling n places, indicate the ground circuits. cross-hatched portions, 2 places on both sides, indicate the metal fittings. not required in products without guideposts. 1 2 3 note 1: there is no polarity in terms of board mounting for this product. note 2: the coplanarity of this product's smt leads is 0.1 mm or less. note 3: please order embossed tape packaged items by the reel. (one reel holds 1,000 pieces.) [specifications number] - ? ? , ( ? ? ) (71): tray packaging (91): embossed tape packaging
12 fx10 series 10 + gbps 0.5mm pitch stacking connectors headers without ground plate 4mm stacking height a0.2 ( 0.5 ) 0.2 0.05 5.9 0.3 ( 5.7 ) 2.5 0.2 b0.3 ( 0.6 ) c0.1 2-(?1) guidepost 3.50.3 unit: mm part no. cl no. fx10a- 96p-sv(**) fx10a-120p-sv(**) fx10a-144p-sv(**) fx10a-168p-sv(**) fx10b- 96p-sv(**) fx10b-120p-sv(**) fx10b-144p-sv(**) fx10b-168p-sv(**) cl570-0041-0-** cl570-0042-2-** cl570-0043-5-** cl570-0044-8-** cl570-0051-3-** cl570-0052-6-** cl570-0053-9-** cl570-0054-1-** number of contacts signal 96 120 144 168 96 120 144 168 a 23.5 29.5 35.5 41.5 23.5 29.5 35.5 41.5 b c d e 31.1 37.1 43.1 49.1 31.1 37.1 43.1 49.1 26.4 32.4 38.4 44.4 31.5 37.5 43.5 49.5 31.5 37.5 43.5 49.5 28.3 34.3 40.3 46.3 28.3 34.3 40.3 46.3 remarks without guideposts with guideposts note 1: there is no polarity in terms of board mounting for this product. note 2: the coplanarity of this product's smt leads is 0.1 mm or less. note 3: please order embossed tape packaged items by the reel. (one reel holds 1,000 pieces.) [specifications number] - ? ? , ( ? ? ) (71): tray packaging (91): embossed tape packaging recommended land pattern dimensions (metal mask dimensions) recommended metal mask thickness: 0.15 mm 1 0.250.03(metal mask) 0.5 0.03 a 0.05 c 0.05 e 0 -0.1 d +0.1 0 ?1.1 0.05 3.1 +0.1 0 1.45 0.05 0.3 0.03(land) 2 0 -0.1 4.1 0 -0.1 6.3 ?1.2 0.05 2 2 1 +0.1 0 note the cross-hatched area inside the smt land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the smt land width. not required in products without guideposts. 1 2
13 fx10 series 10 + gbps 0.5mm pitch stacking connectors recommended land pattern dimensions (metal mask dimensions) recommended metal mask thickness: 0.15 mm headers without ground plate 5mm stacking height a 0.2 ( 0.5 ) 0.2 0.05 5.9 0.3 ( 5.7 ) 2.5 0.2 b 0.3 ( 0.6 ) 4.50.3 c 0.1 2-(? 1) guidepost 0.250.03(metal mask) 0.5 0.03 a 0.05 c 0.05 e 0 -0.1 d +0.1 0 ?1.1 0.05 3.1 +0.1 0 1.45 0.05 0.3 0.03(land) 2 0 -0.1 4.1 0 -0.1 6.3 ?1.2 0.05 2 2 1 +0.1 0 note the cross-hatched area inside the smt land may come into contact with the connector contacts and thus care should be taken that the pattern does not extend beyond the smt land width. not required in products without guideposts. 1 2 unit: mm part no. cl no. fx10a- 96p-sv1(**) fx10a-120p-sv1(**) fx10a-144p-sv1(**) fx10a-168p-sv1(**) fx10b- 96p-sv1(**) fx10b-120p-sv1(**) fx10b-144p-sv1(**) fx10b-168p-sv1(**) cl570-0141-4-** cl570-0142-7-** cl570-0143-0-** cl570-0144-2-** cl570-0151-8-** cl570-0152-0-** cl570-0153-3-** cl570-0154-6-** number of contacts signal 96 120 144 168 96 120 144 168 a 23.5 29.5 35.5 41.5 23.5 29.5 35.5 41.5 b c d e 31.1 37.1 43.1 49.1 31.1 37.1 43.1 49.1 26.4 32.4 38.4 44.4 31.5 37.5 43.5 49.5 31.5 37.5 43.5 49.5 28.3 34.3 40.3 46.3 28.3 34.3 40.3 46.3 remarks without guideposts with guideposts note 1: there is no polarity in terms of board mounting for this product. note 2: the coplanarity of this product's smt leads is 0.1 mm or less. note 3: please order embossed tape packaged items by the reel. (one reel holds 1,000 pieces.) note 4: using multiple connectors between identical boards is not recommended. [specifications number] - ? ? , ( ? ? ) (71): tray packaging (91): embossed tape packaging
14 fx10 series 10 + gbps 0.5mm pitch stacking connectors recommended land pattern dimensions (metal mask dimensions) recommended metal mask thickness: 0.15 mm a0.05 0.50.03 c0.05 e 0 -0.1 d +0.1 0 3.1 +0.1 0 ?1.10.05 ?1.20.05 4.5 0 -0.1 7.7 +0.1 0 1.450.05 0.30.03(land) 0.250.03(metal mask) 1 1 receptacles without ground plate a0.2 ( 0.5 ) 0.2 0.05 7.3 0.3 ( 7.1 ) 2.5 0.2 3.20.3 b0.3 ( 0.6 ) 2-(?1) c0.1 guidepost note not required in products without guideposts. 1 unit: mm note 1: there is no polarity in terms of board mounting for this product. note 2: the coplanarity of this product's smt leads is 0.1 mm or less. note 3: please order embossed tape packaged items by the reel. (one reel holds 1,000 pieces.) note 4: using multiple connectors between identical boards is not recommended. [specifications number] - ? ? , ( ? ? ) (71): tray packaging (91): embossed tape packaging part no. cl no. fx10a- 96s-sv(**) fx10a-120s-sv(**) fx10a-144s-sv(**) fx10a-168s-sv(**) fx10b- 96s-sv(**) fx10b-120s-sv(**) fx10b-144s-sv(**) fx10b-168s-sv(**) cl570-0241-9-** cl570-0242-1-** cl570-0243-4-** cl570-0244-7-** cl570-0251-2-** cl570-0252-5-** cl570-0253-8-** cl570-0254-0-** number of contacts signal 96 120 144 168 96 120 144 168 a 23.5 29.5 35.5 41.5 23.5 29.5 35.5 41.5 b c d e 31.1 37.1 43.1 49.1 31.1 37.1 43.1 49.1 26.4 32.4 38.4 44.4 31.5 37.5 43.5 49.5 31.5 37.5 43.5 49.5 28.3 34.3 40.3 46.3 28.3 34.3 40.3 46.3 remarks without guideposts with guideposts
15 fx10 series 10 + gbps 0.5mm pitch stacking connectors embossed carrier tape dimensions headers 0.9 40.1 (7.6) (8) a0.1 b0.1 c0.3 ( 0.4 ) ( 3.5 ) r0.75 +0.05 0 0.2 0.05 unreeling direction 2 0.1 120.1 ?1.5 + 0.1 0 1.750.1 receptacles (6.2) (d) 0.9 40.1 (6.6) a0.1 b0.1 c0.3 ( 0.4 ) 0.2 0.05 1.750.1 ?1.5 +0.1 0 2 0.1 120.1 unreeling direction r0.75 +0.05 0 reel dimensions (g) (?80) (e) (f) ?130.5 insertion connector b a unit: mm fx10#- 80p/ 8-sv fx10#-100p/10-sv fx10#-120p/12-sv fx10#-140p/14-sv fx10#- 96p -sv fx10#-120p -sv fx10#-144p -sv fx10#-168p -sv fx10#- 80p/ 8-sv1 fx10#-100p/10-sv1 fx10#-120p/12-sv1 fx10#-140p/14-sv1 fx10#- 96p -sv1 fx10#-120p -sv1 fx10#-144p -sv1 fx10#-168p -sv1 20.2 26.2 34.2 20.2 26.2 34.2 20.2 26.2 34.2 20.2 26.2 34.2 40.4 52.4 68.4 40.4 52.4 68.4 40.4 52.4 68.4 40.4 52.4 68.4 44 56 72 44 56 72 44 56 72 44 56 72 3.8 4.8 45.5 59 76.5 45.5 59 76.5 45.5 59 76.5 45.5 59 76.5 50.5 64 81.5 50.5 64 81.5 50.5 64 81.5 50.5 64 81.5 c d e f g 370 330 note: there is no polarity in terms of embossed tape packaging for this product. b a c e f g insertion connector unit: mm fx10#- 80s/ 8-sv fx10#-100s/10-sv fx10#-120s/12-sv fx10#-140s/14-sv fx10#- 96s -sv fx10#-120s -sv fx10#-144s -sv fx10#-168s -sv 20.2 26.2 34.2 20.2 26.2 34.2 40.4 52.4 68.4 40.4 52.4 68.4 44 56 72 44 56 72 45.5 59 76.5 45.5 59 76.5 50.5 64 81.5 50.5 64 81.5 330 note: there is no polarity in terms of embossed tape packaging for this product.
16 fx10 series 10 + gbps 0.5mm pitch stacking connectors connector handling precautions 1. allowable creepage dimensions at time of mating the effective mating length of this product is 1.1 mm for the signal portion and 1 mm for the ground portion. the creepage of t he header and receptacle at the time of mating should be within 0.5 mm of the completely mating condition. 2. retension of boards avoid the support of boards by connectors alone and adopt a locking measure that does not rely on the connectors. 3. solder repair flux may rise as far as the contact portion of the connector depending on the flux coating and other factors at the time of rep air. this will cause poor contact reliability; therefore, before use, the aforementioned washing conditions should be taken into consideration prior to connector washing. 4. miscellaneous note that excessive twisting while inserting or withdrawing connectors will cause damage. the shade of the molded items may vary somewhat depending on the manufacturing lot; however, this does not affect performance. water type cleaning when using water based cleaning agents (e.g., terpene, and alkali saponifiers), select the cleaning agent based on the documentation issued by the various manufacturers of cleaning agents which describes the effects on metals and resins. be careful that parts are not left with moisture remaining on them. cleaning precautions residual flux or cleaning agent on the contacts when washing with organic solvents or water type cleaners can give rise to the deterioration of electrical performance. in this regard it is important to check whether a thorough washing has been performed. washing conditions organic solvent cleaning solvent room temperature washing heated washing ipa (isopropyl alcohol) yes yes hcfc (hydrochlorofluorocarbon) yes yes recommended temperature profile hrs test conditions test board glass epoxy 161mm100mm1.6mm thick solder method :reflow solder composition :paste, 96.5%sn/3%ag/0.5%cu metal mask :0.15mm thick reflow cycles :2 cycles the temperature profile is based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult your solder paste and equipment manufacturer for specific recommendations.
17 fx10 series 10 + gbps 0.5mm pitch stacking connectors notes :
18 fx10 series 10 + gbps 0.5mm pitch stacking connectors notes :
19 fx10 series 10 + gbps 0.5mm pitch stacking connectors notes :
20 fx10 series 10 + gbps 0.5mm pitch stacking connectors usa: hirose electric (u.s.a.), inc. headquarters 2688 westhills court, simi valley, ca 93065-6235 phone : 1-805-522-7958 fax : 1-805-522-3217 http://www.hiroseusa.com hong kong: hirose electric hongkong trading co., ltd. unit 1102 a&b, energy plaza, 92 granville road, tsim sha tsui east, kowloon phone : 852-2803-5338 fax : 852-2591-6560 http://www.hirose-hongkong.com.hk china: hirose electric co., ltd. beijing representative office a1001, ocean international center, building 56# east 4th ring middle road, chao yang district, beijing, 100025 phone : 86-10-5165-9332 fax : 86-10-5908-1381 http://www.hirose-china.com.cn taiwan: hirose electric taiwan co., ltd. 103 8f, no.87, zhengzhou rd., taipei phone : 886-2-2555-7377 fax : 886-2-2555-7350 http://www.hirose-taiwan.com.tw germany: hirose electric europe b.v. german branch herzog-carl-strasse 4 d-73760 ostfildern (scharnhauser park) phone : 49-711-4560-02-1 fax : 49-711-4560-02-299 http://www.hirose.de singapore: hirose electric co., ltd. 10 anson road #26-16 international plaza 079903 phone : 65-6324-6113 fax : 65-6324-6123 http://www.hirose-singapore.com.sg the netherlands: hirose electric europe b.v. hogehillweg #8 1101 cc amsterdam z-o phone : 31-20-6557460 fax : 31-20-6557469 http://www.hiroseeurope.com uk: hirose electric europe b.v. uk branch first floor, st andrews house, caldecotte lake business park, milton keynes mk7 8le phone : 44-1908-369060 fax : 44-1908-369078 http://www.hirose.co.uk usa: hirose electric (u.s.a.), inc. detroit office (automotive) 37677 professional center drive, suite #100c livonia, mi 48154 phone : 1-734-542-9963 fax : 1-734-542-9964 http://www.hiroseusa.com usa: hirose electric (u.s.a.), inc. north california office 20400 stevens creek blvd., ste 250, cupertino, ca 95014 phone : 1-408-253-9640 fax : 1-408-253-9641 http://www.hiroseusa.com china: hirose electric (shanghai) co., ltd. 1501-02, cross tower building, 318 fuzhou road, huang pu district, shanghai 200001 phone : 86-21-6391-3355 fax : 86-21-6335-0767 http://www.hirose-china.com.cn china: hirose electric co., ltd. shenzhen office room 09-13, 19/f, office tower shun hing square, di wang commercial centre 5002, shennandong road, shenzhen city, guangdong province, 518008 phone : 86-755-8207-0851 fax : 86-755-8207-0873 http://www.hirose-china.com.cn korea: hirose korea co., ltd. 1261-10, jeoungwhang-dong, shihung-city, kyunggi-do 429-450 phone : 82-31-496-7000,7124 fax : 82-31-496-7100 http://www.hirose.co.kr the contents of this catalog are current as of date of 01/2011. contents are subject to change without notice for the purpose o f improvements. 5-23,osaki 5-chome,shinagawa-ku,tokyo 141-8587,japan phone: 81-3-3491-5300, fax: 81-3-3495-5230 http://www.hirose.com http://www.hirose-connectors.com

▲Up To Search▲

Price & Availability of FX10B-168P-SV2

	To Download FX10B-168P-SV2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .